Loader Settings
Loader settings can be changed by selecting Tools and Options and then clicking on the Loader tab.
Serial port baud rate, number of data bits, parity and number of stop bits can be changed for serial loaders.
Note that virtual COM ports ( for example, USB to COM converters ) in addition to native COM ports are supported.
Run Command is supported by some loaders ( for example, Generic Serial Loader ). If the Command String has been specified, then following a successful download to the target board, Micro-IDE sends the Command String through the serial port to the target board.
Loader settings can be changed by selecting Tools and Options and then clicking on the Loader tab.
Serial port baud rate, number of data bits, parity and number of stop bits can be changed for serial loaders.
Note that virtual COM ports ( for example, USB to COM converters ) in addition to native COM ports are supported.
Run Command is supported by some loaders ( for example, Generic Serial Loader ). If the Command String has been specified, then following a successful download to the target board, Micro-IDE sends the Command String through the serial port to the target board.